This post may contain affiliate and/or sponsored links.
Shaker cabinets are such a timeless and classic style.
They are always on trend and go with almost any kitchen design.
However, not every kitchen is graced with their presence…
Mine definitely was not.
Somehow, somewhere, some builder thought to himself,
“It’s 2003. I’m going to build a brand new house with beautiful hardwood floors, updated technology, added character, and high end finishes.”
And he (or she) did. Except they forgot about the kitchen.
Maybe they ran out of money.
Maybe they ordered gorgeous cabinets and decided to keep them for themselves.
Maybe they were tired from the floor installation.
Either way, our pretty house came with 80’s style flat panel cabinets.
Not so pretty.
So with a tiny budget and a big imagination, I headed to the home improvement store in hopes of working a miracle.
I really didn’t have a shopping list or a game plan or anything.
I just wandered around until inspiration struck.
(Not the best practice for projects, but every once in a while it works for me.)
In the midst of my wandering, I found these babies.
A bundled up ten pack of long skinny strips of hobby wood.
YES! That will totally work!
I started by sanding them all down with sanding sponges.
I knew a palm sander would be too rough on the soft wood.
After removing all my cabinet doors and bringing them all out onto the back deck, I measured and cut the long sides of each cabinet frame first, then measured and cut the two shorter top and bottom pieces.
Since a shaker style cabinet doesn’t require mitered edges, I was able to line it all up without cutting any angles.
It’s pretty and it saves a ton of time!
You’ll want to cut the pieces with a circular saw or table saw, but I loaned my circular out so I used a jigsaw with a precision blade. It actually worked out great.
If a jigsaw is all you have, you’ll need to put a little painter’s tape on your cut line to reduce splintering.
This hobby wood is kind of soft, so it splinters very easily.
After all my pieces were cut for each individual cabinet and the edges were sanded smooth, I broke out the wood glue and started slapping them on.
By the time I finished gluing on the frame for the last cabinet door, the first one I had done was nice and dry.
Then I started adding finishing nails for extra security.
The glue will hold well, but I like an insurance plan.
I used a nail set tool to drive the nail a little lower than the frame so they’ll be completely invisible after filling and painting.
I used two nails per wood piece, so eight nails per door.
And just as I was finishing up the final nails on the final door frame, I get a text from my husband, who was at work, telling me that we are under a tornado watch.
I’ve been outside with overcast skies this whole time, completely unaware that the weather may get bad.
I scurried around the deck bringing in the doors as fast as possible, and minutes later, the downpour happened.
Ahh, the joys of weekend projects!
So from my new project space, aka the kitchen, I began filling in the holes on the inside of each door with wood filler.
I like these squeeze tubes better than the tubs because the precision point is much easier to fill a big hole like this.
I also used the wood filler to cover the inset nail holes on the frames and the cracks between the frame.
Once it was all dry, I sanded it all over again.
Just a heads up, by now, you’ll despise sanding.
You’ll never want to sand anything ever again.
Next up, caulk.
Again, I used the precision tube.
Mainly because my caulk gun is hard to use. And messy. And I’m lazy.
I caulked around each edge on the inside and outside of the frames.
After 24 hours, they were all ready to paint!
So for those of you who like numbers, be prepared to be persuaded.
To reface cabinets, you have to purchase custom sizes.
These doors range from $15 to $60 each. Plus extra money to drill hinge holes.
Let’s say you considered the mid-range option, plus hole drilling.
If your kitchen has 16 cabinet doors like mine, you’re looking at between $800 and $1000 including shipping.
OR you can be awesome like me, DIY your own, and throw down a whopping $20-ish dollars.
The wood bundle was under $10, the wood glue was $3, and the tubes of caulk and filler were $3 each.
I already owned the finishing nails, paint, and tools, so this project was one of the cheapest I’ve done.
I did, however, change up the hinges and hardware, but those are totally optional.
Want to follow along with my low-cost kitchen renovation?
Check out these other posts I shared during the process.
Coming Soon: How To Install Tile Backsplash On A Budget AND My Kitchen Reveal!
Don’t miss them! Subscribe to my email list so you’ll get updates straight in your inbox.
Join The DIY Design Club
Get instant access to the DIY Design Club Resource Library filled with all of my best tips, tricks, printables, and tutorials. This exclusive content is for members only, and it's free to join!